Dell PowerConnect 5548 User Guide - Page 489

- Associate Primary VLAN - If the Private VLAN type is Isolated, check to associate the isolated VLAN with a primary VLAN, thus allowing traffic between isolated and promiscuous ports. - Primary VLAN ID - Select a VLAN to be associated with the isolated VLAN. 4 To assign ports to the private VLAN, click Membership. 5 Select a Primary VLAN ID. 6 Select a Isolated VLAN ID. 7 Select the ports to be assigned to each VLAN, and assign each port/LAG a port type in the Admin row of ports/LAGs. The possible options are: - H - Host (Isolated) - Port is isolated. - P - Promiscuous - Port is promiscuous. - C - Conditional (operational state depends on Port VLAN Mode) - Port receives the Port VLAN type set in the VLAN Port Settings page. See "Port Modes" on page 462 for a description of the various port modes. Configuring Private VLAN Using CLI Commands The following table summarizes the CLI commands for configuring private VLANs. Table 14-6. Private VLAN CLI Commands CLI Command private-vlan {primary|isolated} no private-vlan private-vlan association [add|remove] secondary-vlanlist no private-vlan association Description Configures a private VLAN. Use the no form of this command to return the VLAN to normal VLAN configuration. Configures the association between the primary VLAN and the secondary VLANs. Use the no form of this command to remove the association. Dell PowerConnect 55xx Systems User Guide 489