Epson 7850p User Manual - Page 158

tip Use a static IP address when configuring a projector for the network if you plan to use it in a group. If you use DHCP, the projector's IP address will change every time you turn it off and on again, and you will have to recreate the projector group. If any of the octets in a static IP address are less than 100, the first digit of the octet should be zero (0). Using Projector Groups You can register projectors as a group if you want to provide quick and easy access to other computers. You can also export or import group information as a file to another computer. Projectors must be connected to the network in Access Point mode, and must be on the same network segment as the computer used to create the group, or the computers that import or export group information. Creating a Group You can register up to 16 projectors as a group, and all projectors must be part of your wireless network. 1. Start NS Connection. Then click the Extension button on the EMP NS Connection screen. You see this screen: Select these two boxes 2. Select Use IP connect mode and Use Group List. 158 Managing Projectors