Epson 7850p User Manual - Page 34

caution When replacing batteries, take the following precautions: ■ Replace the batteries as soon as they run out. If the batteries leak, wipe away battery fluid with a soft cloth. If fluid gets on your hands, wash immediately. ■ Do not expose batteries to heat or flame. ■ Dispose of used batteries according to local regulations. ■ Remove the batteries if you won't be using the projector for a long period of time. Replacing the Batteries If the projector stops responding to the remote control, check the following: ■ Make sure the remote control's ON/OFF switch (shown on page 32) is in the ON position. ■ Press the light button and check to see if the buttons on the remote control light up. (If you're in a bright room, you may not be able to see them light.) If the buttons do not light up, replace the batteries as described below: 1. Turn the remote control over. 2. Press down on the ridges at one end of the battery cover as you slide the cover off. 3. Install two AA batteries, inserting the flat (negative) ends in first. 4. Slide the cover back in place. 34 Using the Remote Control