Epson 7850p User Manual - Page 178
Solving Problems, Status lights, Warning, Light, Status, Description
UPC - 010343845992
View all Epson 7850p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Status lights Light Status Description flashing orange red flashing orange Rapid cooling in progress. Although this is not an abnormal condition, projection will stop automatically if the temperature rises higher. Make sure there is plenty of space around and under the projector for ventilation, and that the air filters and vents are clear. The projector is overheating, which turns the lamp off automatically. Wait until the cooling fan stops, then unplug the power cord. Plug the power cord back in and press the Power button. Make sure the room temperature is not above 95 °F (35 °C) and there is plenty of space around and under the projector for ventilation. The air filters may be clogged. Clean or replace them as described on page 169. If the projector continues to overheat after you clean the air filter, the problem may be caused by damage to the cooling fan or temperature sensor. Contact EPSON for help. Warning: Except as specifically explained in this User's Guide, do not attempt to service this product yourself. It's time to replace the lamp. See page 170 for instructions. If you continue to use the lamp after the replacement warning, there is an increased possibility that the lamp may break. flashing red flashing red The lamp may be burned out. First make sure the lamp cover is securely installed. If that's not the problem, remove the lamp and replace it as described on page 170. If this does not resolve the problem, contact EPSON as described on page 191. Power is cut off because of an internal problem. Remove the power cord and contact EPSON for help, as described on page 191. 178 Solving Problems