Epson 7850p User Manual - Page 188

■ If you're using Access Point mode and you're connecting to the wrong network, you may be experiencing signal interference from another network. Try resetting your access point or base station, then restart NS Connection. ■ If you're using AirPort, the projector's ESSID should match the AirPort network name, not the name of the AirPort base station. To check the network name, start the AirPort Admin utility, select your base station, and click Configure. Then click Show All Settings. The network name appears on the AirPort tab. ■ Try setting your AirPort Extreme card to operate in 802.11b only mode. To access this setting, start the AirPort Admin utility, select your base station, click Configure, and then click Show All Settings. Finally, click the Network tab. ■ If you're prompted for a password when you connect, enter the WEP encryption key if you're using WEP encryption. ■ Try connecting using IP Connect Mode. See page 95 for instructions. ■ Restart your computer. An image displayed with EasyMP appears distorted. Because of their resolution, some JPEG images cannot be displayed correctly. Some JPEG files from digital cameras cannot be previewed. Files with a high compression ratio may appear blurry. In EMP SlideMaker, PowerPoint files don't appear in the file window. EMP SlideMaker does not support PowerPoint 95. Files created in this version of PowerPoint must be opened and resaved in PowerPoint 97 or later. 188 Solving Problems