Epson 7850p User Manual - Page 186
Solving EasyManagement Problems
UPC - 010343845992
View all Epson 7850p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
186 Solving Problems Solving EasyManagement Problems You don't see your projector in the EMP Monitor window. ■ Make sure that you've connected the projector to the network and configured it correctly; see page 142 for information about setting up the projector for a wired network, or page 70 for information about setting it up for a wireless network. Also, make sure you've registered the projector with EMP Monitor. See page 144. ■ Make sure that Standby Mode in the projector's Advanced 1 menu is set to Network ON. ■ If the computer you are using is running Windows XP or 2000, you must be logged in as the Administrator. ■ Try restarting your computer. You can't connect to the projector using NS Connection. ■ Make sure you've installed the EPSON 802.11b card correctly in the projector; see page 68 for instructions. If you have to reinstall the card, restart NS Connection or the program will not be able to detect the projector. ■ Make sure your projector and computer are configured correctly. See page 70 (Ad Hoc mode) or page 77 (Access Point mode) or details. ■ Make sure that you have sufficient wireless signal strength (above 50 per cent). If you have a Macintosh, check the AirPort icon on the Macintosh menu bar. For Windows, see the documentation for your computer's wireless card or adapter for details. ■ Make sure you aren't projecting one of the EasyMP configuration screens. (You should see a message that the projector is ready to connect.) If you have to exit a configuration screen, restart NS Connection. ■ If the projector is configured for Access Point mode and you're using DHCP, allow a minute or two for your projector to appear. Sometimes it takes the server a little while to pick up the IP address.