HP Photosmart 2570 User Guide - Page 29
My Bluetooth Places, A Bluetooth Printer - printer driver
View all HP Photosmart 2570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 3 3. If you are using an external Bluetooth® adapter for your computer, make sure your computer is started and then attach the Bluetooth® adapter to a USB port on the computer. If you have Windows XP with Service Pack 2 installed, the Bluetooth® drivers are installed automatically. If you are prompted to select a Bluetooth® profile, select HCRP. If your computer has Bluetooth® built in, just make sure the computer is started. 4. On the Windows taskbar, click Start, and then click Printers and Faxes. 5. Double-click the Add Printer icon. 6. Click Next, and then select A Bluetooth Printer. 7. Follow the onscreen instructions to finish the installation. 8. Print as you would to any printer. To install and print using the Widcomm stack (Windows) 1. Make sure that you have installed the HP All-in-One software on the computer. Note The purpose of installing the software is to make sure the print driver is available for the Bluetooth® connection. Therefore, if you have already installed the software, you do not need to reinstall it. If you want both a USB and a Bluetooth® connection to your HP All-in-One, install the USB connection first. For more information, see the printed Setup Guide. However, if you do not want a USB connection, select Directly to the computer on the Connection Type screen. Also, on the Connect Your Device Now screen, select the check box next to If you are unable to connect your device now... at the bottom of the screen. 2. Attach an HP Bluetooth® adapter to the front USB port of the HP All-in-One. 3. Click the My Bluetooth Places icon on the desktop or in the taskbar. 4. Click View devices in range. 5. Once the available printers are discovered, double-click the name of HP All-in- One to finish the installation. 6. Print as you would to any printer. Mac users You can connect your HP All-in-One to a Mac that has Bluetooth® built in, or you can install an external Bluetooth® adapter, such as an HP Bluetooth® adapter. To install and print using Bluetooth® (Mac) 1. Make sure that you have installed the HP All-in-One software on the computer. 2. Attach an HP Bluetooth® adapter to the front USB port of the HP All-in-One. 3. Press the On button on the control panel to turn the HP All-in-One off, and press it again to turn the device on. 4. Attach a Bluetooth® adapter to the computer and turn it on. Or, if your computer has Bluetooth® built in, just turn on your computer. 5. Open the Printer Setup Utility from the Applications:Utilities folder. Note This utility is called the Printer Setup Utility on 10.3 and later. It is called Print Center on 10.2.x. 6. From the pop-up menu, choose Bluetooth, then click Add Finish setup 26 HP Photosmart 2570 All-in-One series