Intel S2600GZ S2600GZ/GL - Page 103
Fan Connectors
View all Intel S2600GZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
On-board Connector/Header Overview Intel® Server Board S2600GZ/GL TPS 8.3.3 Internal Type-A USB Connector The server board includes one internal Type-A USB connector labeled "USB 2" and is located near the back edge of the board next to the Riser 1 slot. The following table provides the pinout for this connector. Table 38. Internal Type-A USB Connector Pin-out ("USB 2") Signal Description Pin# P5V_USB_INT 1 USB2_P2_F_DN 2 USB2_P2_F_DP 3 GROUND 4 8.3.4 Internal 2mm Low Profile eUSB SSD Connector The server board includes one 10-pin 2mm low profile connector with an intended usage of supporting low profile eUSB SSD devices. On the server board this connector is labeled "eUSB SSD". The following table provides the pin-out for this connector. Table 39. Internal eUSB Connector Pin-out ("eUSB SSD") Signal Description Pin# Pin# Signal Description P5V 1 2 NOT USED USB2_P0_DN 3 4 NOT USED USB2_P0_DP 5 6 NOT USED GROUND 7 8 NOT USED NOT USED 9 10 LED_HDD_ACT_N 8.4 Fan Connectors The server board provides support for six system fans. Each 10-pin connector is monitored and controlled by on-board platform management. On the server board, each system fan connector is labeled "SYS_FAN #", where # = 1 thru 6. The following table provides the pin-out for all six system fan connectors. 90 Revision 1.1 Intel order number G24881-004