Intel S2600GZ S2600GZ/GL - Page 205

BIOS Setup Utility Intel® Server Board S2600GZ/GL TPS This option is only visible when the IPv6 option is set to Enabled. When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The setting of IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or can be edited (when Static). Back to [BMC LAN Configuration Screen] - [Server Management Screen] 18. BMC DHCP Host Name Option Values: [Entry Field, 2-63 characters] Help Text: View/Edit BMC DHCP host name. Press to edit. Host name should start with an alphabetic, remaining can be alphanumeric characters. Host name length may be from 2 to 63 characters. Comments: This field is active and may be edited whenever at least one of the IP Source or IPv6 Source options is set to Dynamic. This is the name of the DHCP Host from which dynamically assigned IPv4 or IPv6 addressing parameters are acquired. The initial value for this field is supplied from the BMC, if there is a DHCP Host available. The user can edit the existing Ho or enter a different DHCP Host Name. If none of the IP/IPv6 Source fields is set to Dynamic, then this BMC DHCP Host Name field will be grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] 19. User ID Option Values: anonymous root User3 User4 User5 Help Text: Select the User ID to configure: User1 (anonymous), User2 (root), and User3/4/5 are supported. Comments: These 5 User IDs are fixed choices and cannot be changed. The BMC supports 15 User IDs natively, but only the first 5 are supported through this interface. Back to [BMC LAN Configuration Screen] - [Server Management Screen] 192 Revision 1.1 Intel order number G24881-004