Intel S2600GZ S2600GZ/GL - Page 173

BIOS Setup Utility Intel® Server Board S2600GZ/GL TPS Comments: Legacy IRQ. This field should not appear when Serial A port enable/disable does not appear. Back to [Serial Port Configuration Screen] 4. Serial B Enable Option Values: Help Text: Enabled Disabled Enable or Disable Serial port B. Comments: Serial Port B can be used for Serial Console Redirection. SOL cannot be routed to Serial B except on W2600CR boards, which do not have a Serial A port. Back to [Serial Port Configuration Screen] 5. Address Option Values: Help Text: 2F8h 3E8h 2E8h 3F8h Select Serial port B base I/O address. Comments: Legacy I/O port address. Back to [Serial Port Configuration Screen] 6. IRQ Option Values: 3 4 Help Text: Select Serial port B interrupt request (IRQ) line. Comments: Legacy IRQ Back to [Serial Port Configuration Screen] 12.2.2.9 USB Configuration The USB Configuration screen allows the user to configure the available USB controller options. To access this screen from the Main screen, select Advanced > USB Configuration. To move to another screen, press the key to return to the Advanced screen, then select the desired screen. This screen should display all USB Mass Storage devices which have been detected in the system. These include USB-attached Hard Disk Drives (HDDs), Floppy Disk Drives (FDDs), CDROM and DVDROM drives, and USB Flash Memory devices (USB Key, Keyfob, and so on). Each USB Mass Storage device may be set to allow the media emulation for which it is formatted, or an emulation may be specified. For USB Flash Memory devices in particular, there are some restrictions: 160 Revision 1.1 Intel order number G24881-004