Intel S2600GZ S2600GZ/GL - Page 165
Screen Field Descriptions, Enabled
View all Intel S2600GZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
BIOS Setup Utility IOM2 Port3 MAC Address IOM2 Port4 MAC Address Intel® Server Board S2600GZ/GL TPS Figure 48. NIC Configuration Screen Screen Field Descriptions: 1. Wake on LAN (PME) Option Values: Enabled Disabled Help Text: Enables or disables PCI PME function for Wake on LAN capability from LAN adapters. Comments: Enables/disables PCI/PCIe PME# signal to generate Power Management Events (PME) and ACPI Table entries required for Wake on LAN (WOL). However, note that this will enable WOL only with an ACPI-capable Operating System which has the WOL function enabled. Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen] 2. PXE 1GbE Option ROM Option Values: Enabled Disabled Help Text: Enable/Disable Onboard/IOM NIC PXE Option ROM Load. Comments: This selection is to enable/disable the 1GbE PXE Option ROM that is used by all Onboard and IO Module 1 GbE controllers. This option is grayed out and not accessible if the discs Option ROM is enabled. It can co-exist with the 10 GbE PXE Option ROM, the 10 GbE FCoE Option ROM, or with an Infiniband* controller Option ROM. If the 1GbE PXE Option ROM is disabled, and no other Option ROM is enabled, the system cannot perform a Network Boot and cannot respond for Wake-on-LAN. This 1GbE PXE option does not appear unless there is a 1 GbE NIC installed in the system as an Onboard or IO Module NIC. Back to [NIC Configuration Screen] - [PCI Configuration Screen] - [Advanced Screen] 152 Revision 1.1 Intel order number G24881-004