Intel S2600GZ S2600GZ/GL - Page 200
Disabled, Dynamic
View all Intel S2600GZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Intel® Server Board S2600GZ/GL TPS BIOS Setup Utility 3. Gateway IP Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default] Help Text: View/Edit Gateway IP. Press to edit. Comments: This specifies the IPv4 addressing Gateway IP for the Baseboard LAN. There is a separate IPv4 Gateway IP field for the Intel® RMM4 LAN configuration. When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The setting of IP Source determines whether this field is display-only (when Dynamic) or can be edited (when Static). When IPv6 addressing is enabled, this field is grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] 4. IPv6 Option Values: Enabled Disabled Help Text: Option to Enable/Disable IPv6 addressing and any IPv6 network traffic on these channels. Comments: The initial value for this field is acquired from the BMC. It may be changed in order to switch between IPv4 and IPv6 addressing technologies. When this option is set to Disabled, all other IPv6 fields will not be visible for the Baseboard LAN and Intel® RMM4 DMN (if installed). When IPv6 addressing is Enabled, all IPv6 fields for the Baseboard LAN and Intel® RMM4 DMN will become visible, and all IPv4 fields will be grayed out and inactive. Back to [BMC LAN Configuration Screen] - [Server Management Screen] 5. IPv6 Source Option Values: Static Dynamic Auto Help Text: Select BMC IPv6 source: If [Static], IPv6 parameters may be edited. If [Dynamic], these fields are display-only and IPv6 address is acquired automatically (DHCP). If [Auto], these fields are display-only and IPv6 address is acquired using ICMPv6 router/neighbor discovery. Comments: This specifies the IP Source for IPv6 addressing for the Baseboard LAN configuration. There is a separate IPv6 Source field for the Intel® RMM4 LAN configuration. This option is only visible when the IPv6 option is set to Enabled. When IPv6 addressing is Enabled, the initial value for this field is acquired from the BMC, and its setting determines whether the other Baseboard LAN IPv6 addressing fields are display-only (when Dynamic or Auto) or can be edited (when Static). Back to [BMC LAN Configuration Screen] - [Server Management Screen] Revision 1.1 187 Intel order number G24881-004