Intel S2600GZ S2600GZ/GL - Page 225

BIOS Setup Utility Intel® Server Board S2600GZ/GL TPS Comments: Selection only. Position to this line and press the key to discard any pending unsaved changes in BIOS settings. If there have been no changes made in the settings, the BIOS will resume executing POST. If changes have been made in BIOS settings and not yet saved, a confirmation pop-up will appear. If the "Discard Changes" action is positively confirmed, all pending changes will be discarded and BIOS will resume executing POST. If the "Discard Changes" action is not confirmed, BIOS will resume executing Setup without discarding pending changes. Back to [Save & Exit Screen] 5. Load Default Values Option Values: Help Text: Load Defaults Values for all the setup options. Comments: Selection only. Position to this line and press the key to load default values for all BIOS settings. These are the initial factory settings ("failsafe" settings) for all BIOS parameters. There will be a confirmation popup to verify that the user really meant to take this action. After initializing all BIOS settings to default values, the BIOS will resume executing Setup, so the user may made additional changes in the BIOS settings if necessary (for example, Boot Order) before doing a "Save Changes and Exit" with a reboot to make the default settings take effect, including any changes made after loading the defaults. The function key may also be used from anyplace in Setup to initiate a "Load Default Values" action. Back to [Save & Exit Screen] 6. Save as User Default Values Option Values: Help Text: Save the changes made so far as User Default Values. 212 Revision 1.1 Intel order number G24881-004