Intel S2600GZ S2600GZ/GL - Page 96

Intel® Server Board S2600GZ/GL TPS On-board Connector/Header Overview 8.1.3 Hot Swap Backplane Power Connector The server board includes one 8-pin power connector that can be cabled to provide power for hot swap backplanes. On the server board, this connector is labeled as "HSBP PWR". The following table provides the pin-out for this connector. Table 26. Hot Swap Backplane Power Connector Pin-out ("HSBP PWR") Signal Description Pin# Pin# Signal Description P12V_240VA1 5 1 GROUND P12V_240VA1 6 2 GROUND P12V_240VA2 7 3 GROUND P12V_240VA2 8 4 GROUND 8.1.4 Peripheral Drive Power Connector The server board includes one 6-pin power connector intended to provide power for peripheral devices such as Optical Disk Drives (ODD) and/or Solid State Devices (SSD). On the server board this connector is labeled as "ODD/SSD_ PWR". The following table provides the pin-out for this connector. Table 27. Peripheral Drive Power Connector Pin-out ("ODD/SSD_PWR") Signal Description Pin# Pin# Signal Description P12V 4 1 P5V P3V3 5 2 P5V GROUND 6 3 GROUND 8.2 Front Panel Headers and Connectors The server board includes several connectors that provide various possible front panel options. This section provides a functional description and pin-out for each connector. 8.2.1 Front Panel Support Included on the front edge of the server board is a 30-pin SSI compatible front panel header which provides for various front panel features including:  Power/Sleep Button  System ID Button  System Reset Button  NMI Button  NIC Activity LEDs  Hard Drive Activity LEDs  System Status LED  System ID LED Revision 1.1 83 Intel order number G24881-004