Brother International LZ2-B856E Instruction Manual - English and Spanish - Page 110
Correction sewing, 4. Korrekturnähen, 4. Couture de correction, 4. Costura de corrección
View all Brother International LZ2-B856E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
7. USING THE OPERATION PANEL 7. VERWENDUNG DER BEDIENUNGSTAFEL 7. UTILISATION DU PANNEAU DE COMMANDE 7. USO DEL TABLERO DE CONTROLES 7-4. Correction sewing 7-4. Korrekturnähen 7-4. Couture de correction 7-4. Costura de corrección When the correction key q is illuminated, you can sew stitch by stitch at low speed (220 rpm) after the treadle has been released at the neutral position. Note: If the actuator is pressed by mistake when using the correction sewing function, the needle will move in a zigzag motion while the machine is operating, and injury may result. * Correction sewing cannot be carried out when the treadle has been depressed backward and sewing stops, or immediately after the SET key has been pressed to accept a setting. Bei leuchtender Korrekturtaste q können Sie nach dem Loslassen des Pedals in die Neutralstellung Stich für Stich mit niedriger Geschwindigkeit (220/min) nähen. Hinweis: Falls die Betätigungstaste beim Korrekturnähen irrtümlich gedrückt wurde, bewegt sich die Nadel beim Betätigen der Maschine hin und her, so daß eine Verletzungsgefahr vorhanden ist. * Korrekturnähen ist nicht möglich, wenn das Pedal nach hinten gedrückt ist und die Maschine stoppt oder unmittelbar nach dem Drücken der SET-Taste zum Eingeben von Einstellungen. Lorsque la touche de correction q est allumée, on peut coudre point par point à vitesse lente (220 tr/mn) après avoir relâché la pédale à la position neutre. Remarque: Si l'actuateur est pressé par erreur alors que la fonction de correction de couture est utilisée, l'aiguille se déplacera en zigzag pendant que la machine fonctionne et des blessures peuvent s'ensuivre. * La couture de correction ne peut pas être effectuée lorsqu'on a appuyé sur la pédale vers l'arrière et que la couture s'arrête, ou immédiatement après qu'on ait appuyé sur la touche SET pour accepter un réglage. Cuando la tecla de corrección q se enciende, se puede coser puntada por puntada a baja velocidad (220 rpm) después de que el pedal haya sido liberado en la posición neutral. Nota: Si el impulsor es presionado por error al usar la función de costura de corrección, la aguja se moverá en zigzag mientras que la máquina está funcionando, y puede resultar en heridas. * La costura de corrección no se puede realizar cuando el pedal haya sido pisado hacia atrá y se para la costura, o inmediatamente después que la tecla SET ha sido presionada para aceptar un ajuste. 12 3 4 56 7 8 9 PAT T ERN S S ROM L r w TEST q 1. Press the correction key q. The indicator w will illuminate and correction sewing will be possible. 2. After releasing the treadle at the neutral position, gently press the actuator e once to sew a single stitch. If the actuator e is pressed continuously, sewing will continue at low speed. * If the correction key q is pressed once more, the indicator w will switch off and correction operation will stop. Note: If the pattern number selected is 5|A or 6|A, the actuator e is used to change over to sewing reflection patterns, so that correction sewing can- not be carried out for these pattern numbers. (Correction sewing is possible for 5|+ and 6|+ pat- tern numbers.) 1. Drücken Sie die Korrekturtaste q Die Anzeige w leuchtet und das Korrekturnähen ist möglich. e 2. Drücken Sie nach dem Loslassen des Pedals in die Neutralstellung einmal langsam die Betätigungstaste e, um einen einzelnen Stich zu nähen. Wenn die Betätigungstaste e gedrückt gehalten wird, so wird mit niedriger Geschwindigkeit genäht. * Wenn die Korrekturtaste q nochmals gedrückt wird, erlischt die Anzeige w und die Korrekturnähfunktion wird ausgeschaltet. Hinweis: Bei den Stichmustern 5|A und 6|A wird mit der Betätigungstaste e auf das spiegelbildliche Stichmuster umgeschaltet, deshalb ist für diese Stichmuster kein Korrekturnähen möglich. (Für die Stichmuster 5 | + und 6 | + ist das Korrekturnähen möglich.) 91 LZ2-B855E,B856E