Brother International LZ2-B856E Instruction Manual - English and Spanish - Page 184

12. STANDARD ADJUSTMENTS 12. STANDARDEINSTELLUNGEN 12. REGLAGES STANDARD 12. AJUSTES ESTANDARES The ˛ mark indicates factory default settings. ˙ DIPSW1 No. Function Operation when OFF Operation when ON 1 Treadle specifications




Domestic Japan ˛ Export 2 (Spare) ˛ Do not set to ON Do not set to ON 3 Automatic presser lifter ˛ Not used Used 4 (Spare) ˛ Do not set to ON Do not set to ON 5 Motor operation when "UP" displayed ˛ Does not operate (turning by hand only) Operates (treadle depressed backwards, half stitch key) 6 Maximum sewing speed limit Table 1 below Table 1 below 7 Maximum sewing speed limit Table 1 below Table 1 below 8 Maximum sewing speed limit Table 1 below Table 1 below (Table 1) maximum sewing speed limit (rpm) DIPSW1-6 DIPSW1-7 DIPSW1-8 Maximum sewing speed OFF OFF OFF 1000 ON OFF OFF 2000 OFF ON OFF 2500 ON ON OFF 3000 OFF OFF ON 3500 ON
OFF
ON 4000 ˛ OFF ˛ ON ˛ ON ˛ 4500 ON ON ON 5000 ˙ DIPSW2 No. Function Operation when OFF Operation when ON 1 Zigzag width limit Table 2 below Table 2 below 2 Zigzag width limit Table 2 below Table 2 below 3 4 .5 Sewing start position ˛ Table 3 below Needle zigzagging when treadle is depressed backward ˛ OFF Backtack zigzag width setting Enabled Table 3 below ON ˛ Disabled 6 Voltage specifications 220V, 230V, 240V, 380V, 400V 110V 7 (Spare) ˛ Do not set to ON Do not set to ON 8 Panel key lock ˛ Not locked Locked (panel key inputs ignored) * * ... When the panel is locked, `|| is displayed at all times. (Table 2) Zigzag width limit DIPSW2-1 ON DIPSW2-2 ON Maximum zigzag width ˛ ON ˛ OFF ˛ 8mm OFF ON 5mm OFF OFF 3mm Do not make this setting. (Table 3) Sewing start position after the SET key is pressed to accept a setting Zigzag stop position DIPSW2-3 ˛ OFF ˛ ON Left stopping Left Right No position specified Left Right Right stopping Right Left 165 LZ2-B855E,B856E