Brother International LZ2-B856E Instruction Manual - English and Spanish - Page 36
Ajuste del levantador de rodilla Excepto-90
View all Brother International LZ2-B856E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5. INSTALLATION 5. MONTAGE 5. INSTALLATION 5. INSTALACION 5-6. Installing the knee lifter plate (Except-90 ˘ ) 5-6. Anbringen der Kniehebelplatte (außer-90 ˘ ) 5-6. Installation de la plaque de releveur au genou (Sauf-90 ˘ ) 5-6. Instalación de la placa del levantador de rodilla (Excepto-90 ˘ ) Place the knee lifter assembly qonto the knee lifter bar w w on the oil pan, and then secure it by tightening the bolt e. * Adjust the position of the knee lifter plate qso that it is easy to use. e Bringen Sie den Kniehebel q an der Kniehebelstange w der Olwanne an und befestigen Sie sie mit der Schraube e. * Stellen Sie die Position der Kniehebelplatte q für eine komfortable Bedienung ein. q Place l'ensemble q de releveur au genou sur l'arbre w de releveur au genou situé sur le réservoir d'huile, puis le fixer en serrant le boulon e. * Régler la position de la plaque de releveur au genou q de manière qu'on puisse l'utiliser facilement. Colocar el conjunto del levantador de rodilla q en el eje del levantador de rodilla w en la bandeja de aceite, y luego asegurarla apretando el perno e. * Ajustar la posición de la placa del levantador de rodilla q de manera que sea fácil de usar. 5-7. Adjusting the knee lifter (Except-90 ˘ ) 5-7. Einstellen des Kniehebels (außer-90 ˘ ) 5-7. Réglage du releveur au genou (Sauf-90 ˘ ) 5-7. Ajuste del levantador de rodilla (Excepto-90 ˘ ) q w e y 10mm u r i 2mm t 1. Turn the machine pulley so that the feed dog is below the top of the needle plate. 2. Lower the presser foot w by using the presser bar lifter q. 3. Loosen the nut e. 4. Turn the screw y to adjust so that the amount of play in the knee lifter t is approximately 2 mm when the knee lifter plate r is gently pressed. 5. Securely tighten the nut e. 6. Lossen the nut u. 7. Turn the screw i until the distance between the end of the screw i and the knee lifter t is approximately 10 mm. 8. Turn the adjusting screw i to adjust so that the presser foot w is at the desired position within a distance of 10 mm of the needle plate when the knee lifter plate r is fully pressed. 9. After adjustment is completed, securely tighten the nut u. Within 10 mm innerhalbe 10 mm A 10 mm au maximum A 10 mm 17 LZ2-B855E,B856E