Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 116
Interface Settings
View all Canon imageCLASS MF6595cx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 ˙ Interface Settings Ethernet Driver You can specify the communication method and Ethernet connection type. The default setting is . 1. Press [Additional Functions]. 2. Press [ ] or [ ] to select , then press [OK]. 3. Press [ ] or [ ] to select , then press [OK]. 4. Press [ ] or [ ] to select , then press [OK]. 5. Press [ ] or [ ] to select , then press [OK]. Back Previous Next TOP 6. Press [ ] or [ ] to select the desired detection method, then press [OK]. : Automatically determines the communication mode (Half duplex/Full duplex) and Ethernet type (10Base-T/100BaseTX). Skip to step 11. : You have to manually specify the communication mode and Ethernet type. If you reconnect the network cable (for example, reconnect the cable to a different Ethernet hub) with the power on, the Auto Detect function will not work even if you set to . (Connect the cable with the power off.) 7. If you have selected in step 6, press [ ] or [ ] to select , then press [OK]. 8. Press [ ] or [ ] to select the desired communication method, then press [OK]. : Sends and receives alternately. : Sends and receives simultaneously. 9. Press [ ] or [ ] to select , then press [OK]. Table of Contents Index 6-6