Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 64
Press [Start
View all Canon imageCLASS MF6595cx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 1 to 2-Sided You can make two-sided copies from one-sided documents. 1. Set documents. Place the first page on the platen glass if you are not using the ADF. 2. Press [COPY]. 3. Press [2-Sided]. 4. Press [ ] or [ ] to select 2-SIDED>, then press [OK]. 5. Press [ ] or [ ] to select or , then press [OK]. : The front and back sides of the copy will have the same top-bottom orientation. : The front and back sides of the copy will have opposite top-bottom orientations. For the landscape oriented documents, the front and back sides of the copy will have the opposite top-bottom orientation when is selected. When is selected, the front and back sides of the copy will have the same top-bottom orientation. Back Previous Next TOP 6. Use the numeric keys to enter the desired copy quantity (1 to 99). 7. Press [Start]. When you set the document on the platen glass, press [Start] for each page. When scanning is complete, press [OK]. - To cancel all settings, press [Reset]. - When you switch the mode by pressing the mode keys such as [FAX], all settings will be also canceled. If you want to keep the settings, store the settings in in . (See "STANDARD SETTINGS," on p. 11-10.) - Instead of performing step 5, you can just press [OK]. In this case, the machine makes copies. Table of Contents Index 3-10