Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 91
Fax Dialing Features, Switching Temporarily to Tone Dialing, Redialing
View all Canon imageCLASS MF6595cx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Table of Contents Index Fax Dialing Features ˙ Switching Temporarily to Tone Dialing If your machine is set for pulse dialing, use the procedure below to switch to tone dialing to use information services (e.g., banks, airline reservations, and hotel reservations). To talk to the other party, you will need to connect an external telephone to the machine. 1. Press [FAX]. 2. Press [Hook]. Make sure to confirm the dial tone before entering a fax number. If you enter the number before the dial tone can be heard, the call may not be connected, or the wrong number may be dialed. 3. Use the numeric keys to dial the required information service. 4. When the recorded message of the information service answers, press [Tone] to switch to tone dialing. 5. Use the numeric keys to enter the numbers requested by the information service. 6. If you want to receive faxes, press [Start]. Back Previous Next TOP 7. When finished, press [Hook] to disconnect the call. Tone dialing is canceled when you disconnect the call. ˙ Redialing Redialing can be done manually or automatically. For automatic redialing, you can set how many times the machine redials and the time between redials. Redialing Manually 1. Set documents. Place the first page on the platen glass if you are not using the ADF. 2. Press [FAX]. 3. Press [Redial] to dial the last number you entered using the numeric keys. To cancel manual redialing, press [Reset]. 4. Press [Start]. When you set the documents on the platen glass, press [ ] or [ ] to select the document size, then press [Start] for each document. When scanning is complete, press [OK] to start dialing. When is set to in in , the machine starts dialing automatically after a preset time. 4-20