Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 214

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Q Is paper loaded in the machine? A Make sure paper is loaded in the machine. (See "Set Up the Machine," in the Starter Guide.) Q Is the telephone cable connected properly? A Make sure the cable is connected properly. (See "Before FAX Setting," in the Starter Guide.) No automatic switching between telephone and fax calls. Q Is the machine set to switch automatically between telephone and fax calls? A For the machine to switch between fax and telephone calls automatically, the receive mode must be set to , , or . If you have set , confirm that external telephone with built in answering machine is connected to the machine and that it is turned on with an outgoing message properly recorded. (See "Basic Receiving Method," on p. 4-23.) Back Previous Next TOP Q Are documents stored in memory, leaving little or no memory available? A Print, send, or delete any documents stored in memory. Q Has an error occurred during reception? A Check the LCD for an error message. (See "LCD Messages," on p. 10-9.) A Print an Activity Report and check for an error. (See "ACTIVITY REPORT," on p. 11-43.) Q Is paper loaded in the machine? A Make sure paper is loaded in the machine. (See "Set Up the Machine," in the Starter Guide.) Q Can the sender's machine send the CNG signal, which tells your machine that the incoming call is a fax call? A Some machines cannot send this signal. In such cases, receive the fax manually. Table of Contents Index 10-27