Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 242

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Back Previous Next TOP FAX SETTINGS (MF6595cx/MF6595/MF6590 Only) Setting Item 1. RX MODE 2. USER SETTINGS 1. UNIT TELEPHONE # 2. UNIT NAME 3. TX TERMINAL ID 1. PRINTING POSITION 2. TELEPHONE # MARK 4. SCANNING DENSITY Description Selects the receive mode. (See "Set the Machine for Receiving Faxes (MF6595cx/MF6595/ MF6590)," in the Starter Guide.) - FaxOnly - FaxTel - AnsMode - DRPD - Manual Specifies the basic operation settings in the fax mode. Registers your fax number. (See "Set the Machine for Sending Faxes (MF6595cx/MF6595/ MF6590)," in the Starter Guide.) Registers your name/company name. (See "Set the Machine for Sending Faxes (MF6595cx/ MF6595/MF6590)," in the Starter Guide.) Sets the options for sender information. Selects where the sender information is printed in small type at the top of each page. - OUTSIDE IMAGE - INSIDE IMAGE Prefixes your number with the abbreviations FAX or TEL in your sender information. - FAX - TEL Adjusts the scanning density for sending a fax. (1-9) Table of Contents Index 11-12