Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 196

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 LCD Messages See the following when the LCD displays error and status messages. ADJUSTING WAITING TO SCAN Description The machine is not ready for scanning. Action Wait until the machine is ready. AUTO REDIAL Description This message appears when the recipient is engaged in direct sending and the job is waiting. Action Disappears when the transmission restarts. CHANGE PAPERSIZE Description The size of the paper in the paper cassette or multipurpose tray is different from that of the paper specified in or in the menu. Action - Load the paper which size is shown on the lower line of the LCD display. Or change the paper size setting. Then reset the machine by opening the left cover and then closing it. - If you are trying to print a report or list, set the paper size to or , then load paper of the same size. Back Previous Next TOP CHANGE REG'D SIZE → COMMON SETTINGS Description This message appears at the same time when is shown. You may not print at the current paper size. Action Change paper on the paper cassette or multipurpose tray. And you must also change the size setting in the menu. CHECK DOCUMENT Description A document jam may have occurred in the ADF. Action Remove the jammed document. CLOSE COVER Description A cover is open. Action Close the cover shown on the lower line of the LCD display. DATA ERROR Description The machine may have trouble. Action Contact Canon Customer Care Center. Table of Contents Index 10-9