Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 96

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 ˙ DRPD: Optional Settings When you select in , select the ring pattern assigned by your telephone company. The default setting is . 1. Press [Additional Functions]. 2. Press [ ] or [ ] to select , then press [OK]. 3. Press [ ] or [ ] to select , then press [OK]. 4. Press [ ] or [ ] to select , then press [OK]. 5. Press [ ] or [ ] to select a ring pattern, then press [OK]. 6. Press [Stop] to return to the standby mode. For , subscription to a DRPD (Distinctive Ring Pattern Detection) service is required. Contact your telephone company for availability. Table of Contents Index Back Previous Next TOP ˙ Manual Reception When you select in , follow the procedure below to receive a fax. 1. When the telephone rings, pick up the external telephone. 2. Press [FAX]. 3. Confirm that the modem's connecting sound is heard, then press [Start]. 4. Hang up the external telephone. ˙ Memory Reception The machine automatically receives faxes in memory when printing is disabled under certain conditions (e.g., toner or paper has run out). Load paper and press [OK] to start printing faxes stored in memory. For toner empty, the machine automatically starts printing when the error is cleared. - For information on the maximum numbers of jobs that can be stored in memory, See Chapter 11, "Troubleshooting," in the Basic Operation Guide. - Once the pages are printed, they are deleted from the memory. - If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and ask them to resend the remaining pages of the fax. 4-25