Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 61

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 ˙ 2 on 1 Combination 2 on 1 combination automatically reduces two-page document to fit on the selected paper size. This feature can be used together with "Collate Copy," on p. 3-6, "Two-Sided Copy," on p. 3-8, and "Binding Hole Erase," on p. 3-14. "2 on 1 Combination" cannot be used together with "Original Frame Erase" or "Book Frame Erase." 1. Set documents. Place the first page on the platen glass if you are not using the ADF. 2. Press [COPY]. 3. Press [2 on 1]. 4. Press [ ] or [ ] to select , then press [OK]. Back Previous Next TOP 5. Press [ ] or [ ] to select the size of the document, then press [OK]. 6. Press [ ] or [ ] to select the paper size, then press [OK]. 7. Use the numeric keys to enter the desired copy quantity (1 to 99). 8. Press [Start]. When you set the document on the platen glass, press [Start] for each page. When scanning is complete, press [OK]. - A maximum of 1/8" (2 to 3 mm) margin will be produced between the two reduced documents in 2 on 1 combination copying. - To cancel all settings, press [Reset]. - When you switch the mode by pressing the mode keys such as [FAX], all settings will be also canceled. If you want to keep the settings, store the settings in in . (See "STANDARD SETTINGS," on p. 11-10.) Table of Contents Index 3-7