Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 127
RX MAC Address Settings
View all Canon imageCLASS MF6595cx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 11. Press [ ] or [ ] to select , then press [OK]. 12. Use the numeric keys to enter the start IP address, then press [OK]. 13. Press [ ] or [ ] to select , then press [OK]. 14. Use the numeric keys to enter the end IP address, then press [OK]. To enter another IP address range, repeat step 10 to 14. 15. Press [Stop] to return to the standby mode. 16. Restart the machine. Back Previous Next TOP RX MAC Address Settings You can restrict the machine access from the computers on the network by specifying the MAC addresses of the computers allowed/forbidden to access the machine. The default setting is . 1. Press [Additional Functions]. 2. Press [ ] or [ ] to select , then press [OK]. 3. Press [ ] or [ ] to select , then press [OK]. 4. Press [ ] or [ ] to select , then press [OK]. 5. Press [ ] or [ ] to select , then press [OK]. Table of Contents Index 6-17