Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 68
Press [Frame Erase]., Binding Hole Erase
View all Canon imageCLASS MF6595cx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Binding Hole Erase Binding hole erase can erase the shadows that appear on copies from binding holes on the documents. 1. Set documents. 2. Press [COPY]. 3. Press [Frame Erase]. 4. Press [ ] or [ ] to select , then press [OK]. 5. Press [ ] or [ ] to specify the location of the binding holes (, , , or ), then press [OK]. 6. Press [ ] or [ ] to set the binding hole erase width, then press [OK]. The width ranges 3/16" to 13/16" (3 to 20 mm) 7. Use the numeric keys to enter the desired copy quantity (1 to 99). 8. Press [Start]. To cancel all settings, press [Reset]. Table of Contents Index Back Previous Next TOP The locations of the binding holes to be erased are shown in the illustration below. 3-14