Canon imageCLASS MF6595cx imageCLASS MF6500 Series Reference Guide - Page 202

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 #0001 Description Action #0003 Description Action Description Action Description Action A document may be jammed. Remove the jammed document. An attempt was made to send a document of 24 7/8" (630 mm) or longer from the ADF. Divide the document into smaller parts and send from the platen glass. A document takes a long time to send because it contains too much data. Reduce the scanning resolution before sending. A document takes a long time to receive. Contact the other party and ask them to reduce their scanning resolution or divide the document into smaller parts for sending. #0005 Description Action Description Action #0009 Description Action Back Previous Next TOP The other fax machine did not respond within 35 seconds. Send the document again. Contact the other party and have them check their fax machine. If you are making an overseas call, add a pause to the number. The other party may not be using a G3 fax machine. Check with the other party and send the document to a G3 fax machine. If the other party does not have a G3 fax machine, try sending your document using a transmission mode the other party's fax machine supports. The paper has run out or the paper cassette is not set properly. Load the paper or reset the paper cassette properly. Table of Contents Index 10-15