Cisco III System Message Guide - Page 149

Chapter 2 Messages and Recovery Procedures EARL_NETFLOW Messages Error Message %EARL_NETFLOW-3-NF_ECC_SOFT_MAX: Too many Netflow ECC errors have occurred, Total Ecc Errors [[dec]] Explanation The total number of NetFlow ECC errors has exceeded the soft limit number. The soft limit of Netflow ECC errors is 2500. The hard limit is 5000. When the hard limit is reached, the line card will reboot. Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs. EARL_NETFLOW-4 Error Message %EARL_NETFLOW-4-ICAM_THRLD: Netflow ICAM threshold exceeded, ICAM Utilization [[dec]%] Explanation The NetFlow ICAM is almost full. Aggressive aging is temporarily enabled. Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs. Error Message %EARL_NETFLOW-4-NF_AGG_CACHE_THR: Netflow [chars] aggregation cache is almost full. Explanation The aggregation cache for NetFlow is almost full. This condition might cause a high CPU load. Recommended Action Consider increasing the size of the aggregation cache, or remove the aggregation cache configuration specified in the error message. OL-11469-02 Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY 2-119