Cisco III System Message Guide - Page 55

Chapter 2 Messages and Recovery Procedures C6KPWR Messages C6KPWR-3 Error Message %C6KPWR-3-PSUNKNOWN: Unknown power supply in slot [dec] (idprom read failed). Explanation The IDPROM of the power supply in the specified slot cannot be read. Recommended Action Remove and reinsert the power supply. Fasten the screw, and attempt to operate the power supply again. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs. C6KPWR-4 Error Message %C6KPWR-4-INPUTCHANGE: Power supply [dec] input has changed. Power capacity adjusted to [chars]W Explanation The power supply in the specified slot has detected a change in its input supply. The power capacity for the power supply has been adjusted accordingly. Recommended Action Enter the show power command to see the current power status. Otherwise, no action is required. Error Message %C6KPWR-4-MAJORPOWERALARMRECOVER: System power usage has returned to allowed operating range Explanation System power usage has returned to the allowed operating range, so the scheduled shutdown was cancelled. The system will continue operating. Recommended Action No action is required. Error Message %C6KPWR-4-MINORPOWERALARM: In the absence of power supply 1, system power usage exceeds the recommended range of [chars]W Explanation The power supply in slot 2 has exceeded its allowed range, causing a minor power alarm. The range is specified in the error message. Selected modules will be shut down to prevent a complete power failure. Recommended Action Enter the show power command to determine the actual power usage. Insert a power supply in power supply slot 1, or power down some modules to reduce system power usage. If downtime can be scheduled, move the power supply from slot 2 to slot 1. OL-11469-02 Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY 2-25