Cisco III System Message Guide - Page 177
HYPERION-4, show platform, hardware hyperion all
UPC - 746320181691
View all Cisco III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Chapter 2 Messages and Recovery Procedures HYPERION Messages HYPERION-4 Error Message %HYPERION-4-HYP_RESET: Hyperion Error Interrupt. Resetting ASIC. Explanation The Hyperion ASIC in the SPA or Enhanced FlexWAN module has received a fatal error. The ASIC is automatically reset, and the SPA or Enhanced FlexWAN module attempts to continue normal operation. Recommended Action No action is required if traffic recovers. If traffic does not recover, copy the error message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the nature of the error. If you cannot determine the nature of the error from the error message text or from the show platform hardware hyperion all output, contact your Cisco technical support representative, and provide the representative with the gathered information. Error Message %HYPERION-4-HYP_RESET: Hyperion ASIC reset, interrupt [chars] Explanation The Hyperion ASIC in the SPA or Enhanced FlexWAN module has received a fatal error. The ASIC is automatically reset, and the SPA or Enhanced FlexWAN module attempts to continue normal operation. Recommended Action No action is required if traffic recovers. If traffic does not recover, copy the error message exactly as it appears on the console or in the system log. Enter the show platform hardware hyperion all command to gather data that may help identify the nature of the error. If you cannot determine the nature of the error from the error message text or from the show platform hardware hyperion all output, contact your Cisco technical support representative, and provide the representative with the gathered information. Error Message %HYPERION-4-UNEXPECTED_VERSION: Unexpected Hyperion version. Explanation The line card is unable to recognize the version of the Hyperion ASIC. Recommended Action No action is required if traffic passes through the line card. If traffic does not pass through the line card, check the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/ to determine in which version this problem is fixed and upgrade accordingly. If traffic does not pass after the upgrade, contact your Cisco technical support representative. HYPERION-5 Error Message %HYPERION-5-BUS_MODE_CHANGE: The System Switching Bus Mode changed to [chars] mode Explanation The system switching bus interface device mode changed switching bus modes. The mode is specified in the system message. Recommended Action The supervisor engine instructed the module to change the mode on the switching bus. No action is required. OL-11469-02 Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY 2-147