Cisco III System Message Guide - Page 57

Chapter 2 Messages and Recovery Procedures C7600_SIP200 Messages C7600_SIP200 Messages This section contains SPA Interface Processor 200 (C7600_SIP200) messages. C7600_SIP200-3 Error Message %C7600_SIP200-3-BADIFCTRL: Corrupted sip-200 information for interface [chars] [[hex]] Explanation The interface SIP 200 information is not valid. An internal software error has occurred. Recommended Action Copy the error message exactly as it appears on the console or in the system log, collect the output of the show memory command on the line card, and contact your technical support representative with the gathered information. Error Message %C7600_SIP200-3-SONET_CLOCK_FAILED: SPA Sonet clock has failed (status = [hex]) Explanation The SPA SONET clock has failed. SPAs that rely on the SPA SONET clock for proper operation, such as PoS and ATM, will be affected. Recommended Action If the SPA SONET clock does not recover, perform an OIR. Error Message %C7600_SIP200-3-SONET_CLOCK_RECOVERED: SPA Sonet clock has recovered (status = [hex]) Explanation SPA SONET clock has recovered. Recommended Action No action is required. C7600_SIP200-4 Error Message %C7600_SIP200-4-MEM_MODULE_MISMATCH: Memory modules are not identical Explanation The memory modules do not have identical parameters. This condition might impact performance. Recommended Action Copy the error message exactly as it appears on the console or in the system log, collect the output of show memory command on the line card, and contact your technical support representative with the gathered information. C7600_SIP200_MP Messages This section contains SIP 200 Multiprocessing (C7600_SIP200_MP) messages. OL-11469-02 Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY 2-27