Cisco III System Message Guide - Page 242

RPC Messages Chapter 2 Messages and Recovery Procedures RF-6 Error Message %RF-3-WAKEUP_STANDBY_NOT_SEEN: Active-Standby RP Handshake Error. The Standby RP did not receive a WAKEUP_STANDBY message from the Active RP during the early initialization phase on the Standby RP. Explanation As part of the early initialization phase, the standby route processor (RP) asks the active RP to awaken it when the active RP is ready to support the standby RP. The active RP has failed to awaken the standby RP. The active RP may have failed during the standby RP's early initialization phase or some other error has prevented the active RP from completing this handshake. Recommended Action The standby RP will be restarted. If the problem persists, restart the system. Error Message %RF-6-STANDBY_READY: The Standby RP has reached HOT-STANDBY state and is now ready for stateful switchover. Explanation The standby route processor (RP) has reached the hot-standby state and is now ready to take over operation in the event that the active RP should fail. Recommended Action No action is required. RPC Messages This section contains Remote Procedure Call (RPC) messages. RPC-2 Error Message %RPC-2-FAILED: Failed to send RPC request [chars] (fatal) Explanation A fatal communication error occurred during an RPC request. Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://tools.cisco.com/Support/BugToolKit/. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://tools.cisco.com/ServiceRequestTool/create, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs. 2-212 Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY OL-11469-02