Cisco III System Message Guide - Page 196

MCAST_MQC Messages Chapter 2 Messages and Recovery Procedures Error Message %MCAST-6-IGMP_RATE_LIMIT_DISABLE: IGMP: enabling Snooping on Vlan([dec]), IGMP messages will not be rate limited Explanation After throttling the IGMP messages on the VLAN for a certain period, snooping is reenabled after the user manually fixes the rate on the offending VLAN and reduces the CPU load. Recommended Action No action is required. Error Message %MCAST-6-IGMP_RATE_LIMIT_ENABLE: IGMP: Incoming IGMP message rate exceeded max threshold([dec] pps), disabling Snooping on Vlan([dec]) with Rate([dec] pps) Explanation The incoming rate of IGMP messages exceeded the maximum configured threshold. Snooping will be disabled on all high-rate VLANs to lower the aggregate rate below the threshold on all remaining VLANs. Recommended Action Ease the CPU load by reducing the rate of IGMP messages on all high-rate VLANs. Error Message %MCAST-6-L2_HASH_BUCKET_COLLISION: Failure installing (G,C)->index: ([enet],[dec])->[hex] Protocol :[dec] Error:[dec] Explanation A Layer 2 entry could not be installed in the hardware because there is not enough space in the hash bucket. Multicast packets will be flooded on the incoming VLAN because the Layer 2 entry installation failed. Recommended Action No action is required. MCAST_MQC Messages This section contains Multicast Modular Quality of Service (MCAST_MQC) command-line interface messages. Error Message %MCAST_MQC-3-CMAP_SDB_REGISTER: Error initialising class-map of type multicast-flows. Explanation The system could not register the component related to the class map of type \n multicast flows to the string database. Recommended Action No action is necessary. This message is for informational purposes only. MDT Messages This section contains Multicast Distribution Tree (MDT) messages. 2-166 Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY OL-11469-02