Cisco III System Message Guide - Page 170

FMCORE Messages Chapter 2 Messages and Recovery Procedures FMCORE Messages This section contains Core Feature Manager (FMCORE) messages. FMCORE-2 Error Message %FMCORE-2-ACL_FAILURE: Interface [chars] traffic will not comply with ACLs in [chars] direction(s) Explanation ACLs will not be applied on traffic for the specified interface because of a TCAM resource contention. Recommended Action The configured ACLs are too large for all of them to fit in the hardware TCAM. Use the mls tcam priority command to prioritize interfaces for hardware switching. Try to share the same ACLs across multiple interfaces to reduce TCAM resource contention. Error Message %FMCORE-2-VACL_FAILURE: Interface [chars] traffic will not comply with VACLs in [chars] direction(s) Explanation VACLs will not be applied on traffic for this interface because of a TCAM resource contention. Recommended Action The configured ACLs are too large for all of them to fit in the hardware TCAM. Use the mls tcam priority command to prioritize interfaces for hardware switching. Try to share the same ACLs across multiple interfaces to reduce TCAM resource contention. FMCORE-4 Error Message %FMCORE-4-RACL_REDUCED: Interface [chars] routed traffic will be software switched in [chars] direction Explanation A TCAM resource contention prevents ACLs from being applied in the TCAM for the specified interface. The traffic on the interface will be sent to software so that the ACLs can be applied. Recommended Action The configured ACLs are too large for all of them to fit in the hardware TCAM. Use the mls tcam priority command to prioritize interfaces for hardware switching. Try to share the same ACLs across multiple interfaces to reduce TCAM resource contention. FM_EARL6 Messages This section contains Enhanced Address Recognition Logic 6 Feature Manager (FM_EARL6) messages. 2-140 Catalyst Supervisor Engine 32 PISA Cisco IOS System Message Guide, Release 12.2ZY OL-11469-02