Dell PowerConnect 6248 User's Guide - Page 124

• Location - This field displays only when the Recurring check box is selected. The summer time configuration is predefined for the United States and European Union. To set the summer time for a location other than the USA or EU, select None. • Start Week - Select the starting week number. This field displays only when the Recurring check box is selected. • Start Day - Select the starting day number. This field displays only when the Recurring check box is selected. • Start Month - Select the starting month. • Start Time - Select the starting time in hh:mm format. • Start Date - Select the starting date. This field displays only when the Recurring check box is cleared. • Start Year - Select the starting year. This field displays only when the Recurring check box is cleared. • End Week - Select the ending week number. This field displays only when the Recurring check box is selected. • End Day - Select the ending day number. This field displays only when the Recurring check box is selected. • End Month - Select the ending month. • End Time - Select the ending time in hh:mm format. • End Date - Select the ending date. This field displays only when the Recurring check box is cleared. • End Year. - Select the ending year. This field displays only when the Recurring check box is cleared. • Offset - Set the number of minutes to add during summer time in the range 0 to 1440. • Zone - Set the acronym of the time zone to be displayed when summer time is in effect. Defining the Summer Time Parameters 1. Open the Summer Time Configuration page. 2. Define the fields as needed. 3. Click Apply Changes. The summer time settings are modified, and the device is updated. Configuring Summer Time Parameters Using CLI Commands For information about the CLI commands that perform this function, see the Clock Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to configure summer time parameters. 124 Configuring System Information