Dell PowerConnect 6248 User's Guide - Page 274

• Receiver Owner String - The entity making use of this sFlowRcvrTable entry. The empty string indicates that the entry is currently unclaimed and the receiver configuration is reset to the default values. An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed before trying to claim it. The entry is claimed by setting the owner string. The entry must be claimed before any changes can be made to other sampler objects. • Receiver Timeout - The time (in seconds) remaining before the sampler is released and stops sampling. A management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one expires. The allowed range is 0 to 4294967295 seconds. A value of zero sets the selected receiver configuration to its default values. • Receiver Maximum Datagram Size - The maximum number of data bytes that can be sent in a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow datagrams. The default value is 1400. The allowed range is 200 to 9116.) • Receiver Address - The IP address of the sFlow collector. If set to 0.0.0.0 no sFlow datagrams will be sent. • Receiver Port - The destination port for sFlow datagrams. The allowed range is 1 to 65535). • Receiver Datagram Version - The version of sFlow datagrams that should be sent. Displaying the sFlow Receiver Summary Table 1. Open the sFlow Receiver Configuration page. 2. Click Show All. The sFlow Receiver Summary page displays: Figure 6-124. sFlow Receiver Summary Viewing sFlow Receiver Information Using CLI Commands For information about the CLI commands that perform this function, see the sFlow Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to configure and view sFlow settings. 274 Configuring System Information