Dell PowerConnect 6248 User's Guide - Page 348

Displaying the STP Port Table and Configuring STP Port Settings 1. Open the STP Port Settings page. 2. Click Show All. The STP Port Table displays. Figure 7-40. STP Port Table 3. Use the Unit drop-down menu to view the STP Port Table for other units in the stack, if they exist. 4. To change the STP settings for one or more ports, select the Edit option for the port(s), configure the desired settings, and then click Apply Changes. Configuring Spanning Tree Port Settings Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Spanning Tree Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-22. Spanning Tree Port Commands CLI Command spanning-tree cost spanning-tree disable spanning-tree guard spanning-tree auto-portfast spanning-tree portfast spanning-tree port-priority spanning-tree tcnguard Description Configures the spanning-tree path cost for a port. Disables spanningtree on a specific port. Selects whether loop guard or root guard is enabled on an interface. Sets the port to auto portfast mode. Enables spanning-tree portfast mode Configures port priority. Prevent a port from propagating topology change notifications. STP LAG Settings Use the STP LAG Settings page to assign STP aggregating ports parameters. 348 Configuring Switching Information