Dell PowerConnect 6248 User's Guide - Page 523

Area Range Configuration Use the OSPF Area Range Configuration page to configure and display an area range for a specified NSSA. To display the page, click Routing →OSPF →Area Range Configuration in the tree view. Figure 9-9. OSPF Area Range Configuration The OSPF Area Range Configuration page contains the following fields: • Area ID - Select the area for which data is to be configured from the drop-down menu. • IP Address - Enter the IP Address for the address range for the selected area. • Subnet Mask - Enter the Subnet Mask for the address range for the selected area. • LSDB Type - Select the type of Link Advertisement associated with the specified area and address range. The default type is 'Network Summary.' • Advertisement - Select Enable or Disable from the drop-down menu. If you selected Enable the address range is advertised outside the area through a Network Summary LSA. The default is Enable. • Add - Check the Add check box if you wish to add an area range. OSPF Area Range Table • Area ID - Displays the OSPF area. • IP Address - Displays the IP address of an address range for the area. • Subnet Mask - Displays the subnet mask of an address range for the area. • LSDB Type - Displays the link advertisement type for the address range and area. • Advertisement - Displays the advertisement mode for the address range and area. • Remove - Removes the specified area entry. Configuring Routing 523