Dell PowerConnect 6248 User's Guide - Page 778

Figure 12-43. BSR Candidate Configuration The BSR Candidate Configuration page contains the following fields: • Interface - Select the interface for which data is to be displayed. • Hash Mask Length - The CBSR hash mask length to be advertised in bootstrap messages if this interface is elected as the bootstrap router. This hash mask length will be used in the hash algorithm for selecting the RP for a particular group. The valid values are from 0 to 128.The default value is 126. • Priority - The priority value for the local interface as a candidate bootstrap router. The valid values are from 0 to 255.The default value is 0. Configuring the BSR Candidate Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • PIM Commands The following table summarizes the equivalent CLI commands for this feature. Table 12-39. PIM BSR Candidate Configuration Commands CLI Command ipv6 pimsm bsr-candidate Description Configures the router to announce its candidacy as a bootstrap router (BSR). BSR Candidate Summary Use this page to display information about the configured BSR candidates. To display this page, click IPv4 Multicast →PIM →BSR Candidate Summary or IPv6 Multicast →PIM →BSR Candidate Summary. 778 Configuring IP Multicast