Dell PowerConnect 6248 User's Guide - Page 721

Multicast Admin Boundary Summary Use the Multicast Admin Boundary Summary page to display existing administratively scoped boundaries. To display the page, click IPv4 Multicast →Multicast →Admin Boundary Summary in the tree view. Figure 12-5. Multicast Admin Boundary Summary The Multicast Admin Boundary Summary page displays the following fields: • Interface - The router interface to which the administratively scoped address range is applied. • Group IP - The multicast group address for the start of the range of addresses to be excluded. • Group Mask - The mask that is applied to the multicast group address. The combination of the mask and the Group IP gives the range of administratively scoped addresses for the selected interface. Displaying the Multicast Admin Boundary Summary Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • Multicast Commands The following table summarizes the equivalent CLI commands for this feature. Table 12-5. Multicast Admin Boundary Summary Command CLI Command show ip mcast boundary Description Displays the system-wide multicast information. Multicast Static MRoute Configuration Use the Multicast Static MRoute Configuration page to configure a new static entry in the Mroute table or to modify an existing entry. Configuring IP Multicast 721