Dell PowerConnect 6248 User's Guide - Page 580

Table 9-34. Router Route Configuration Commands CLI Command ip route ip route default Description Configures a static route. Use the no form of the command to delete the static route. Configures the default route. Use the no form of the command to delete the default route. Configured Routes Use the Configured Routes page to display the routes that have been configured. To display the page, click Routing →Router →Configured Routes in the tree view. Figure 9-40. Configured Routes The Configured Routes page displays the following fields: • Network Address - The IP route prefix for the destination. • Subnet Mask - Also referred to as the subnet/network mask, this indicates the portion of the IP interface address that identifies the attached network. • Next Hop IP - The outgoing router interface to use when forwarding traffic to the destination. • Preference - Displays the preferences configured for the added routes. • Remove - Use this check box to remove a configured route. Adding a Router Route 1. Open the Configured Routes page. 2. Click Add. The Router Route Entry Configuration page displays, as Figure 9-38 shows. 3. Next to Route Type, use the drop-down box to add a Default route or a Static route. 580 Configuring Routing