Dell PowerConnect 6248 User's Guide - Page 666

• Interface Delay Interval (secs) - The OSPF Transit Delay for the virtual link in units of seconds. It specifies the estimated number of seconds it takes to transmit a link state update packet over this interface. Displaying OSPFv3 Virtual Link Summary Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • OSPFv3 Commands The following table summarizes the equivalent CLI commands for this feature. Table 10-23. OSPFv3 Virtual Link Summary Commands CLI Command show ipv6 ospf virtual-link brief Description Displays the OSPFV3 Virtual Interface information for all areas in the system. OSPFv3 Route Redistribution Configuration Use the OSPFv3 Route Redistribution Configuration page to configure route redistribution. To display the page, click IPv6 →OSPFv3 →Route Redistribution Configuration in the tree view. Figure 10-29. OSPFv3 Route Redistribution Configuration The OSPFv3 Route Redistribution Configuration page contains the following fields: • Source Protocol - Select the type of source routes to configure for redistribution by OSPF. Valid values are Static and Connected. • Metric - Sets the metric value to be used as the metric of redistributed routes. This field displays the metric if the source was pre-configured and can be modified. Valid values are 0 to 16777214. • Metric Type - Sets the OSPF metric type of redistributed routes. 666 Configuring IPv6