Dell PowerConnect 6248 User's Guide - Page 386

Modifying LACP Parameters for Multiple Ports 1. Open the LACP Parameters page. 2. Click Show All. The LACP Parameters Table displays. 3. Click Edit for each Port to modify. 4. Edit the fields as needed. 5. Click Apply Changes. The LACP Parameter settings are modified, and the device is updated. Configuring LACP Parameters Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • LACP Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-34. LACP Commands CLI Command lacp port-priority lacp system-priority lacp timeout show lacp ethernet show lacp port-channel Description Configures the priority value for physical ports. Configures the system LACP priority. Assigns an administrative LACP timeout. Displays LACP information for Ethernet ports. Displays LACP information for a port-channel. LAG Membership Your switch supports 48 LAGs per system, and eight ports per LAG. Use the LAG Membership page to assign ports to LAGs and LACPs. To display the LAG Membership page, click Switching →Link Aggregation →LAG Membership in the tree view. 386 Configuring Switching Information