Dell PowerConnect 6248 User's Guide - Page 517

Table 9-6. OSPF Global Commands CLI Command auto-cost bandwidth capability opaque clear ip ospf default-information originate default-metric distance ospf enable exit-overflow-interval external-lsdb-limit ip ospf mtu-ignore maximum-paths passive-interface default router-id router ospf show ip ospf show ip ospf abr show ip ospf asbr show ip ospf statistics timers spf trapflags 1583compatibility Description Changes the reference bandwidth used in computing link cost. Changes the bandwidth used in computing link cost. Enables Opaque Capability on the router. Resets specific OSPF states. Controls the advertisement of default routes. Sets a default for the metric of distributed routes. Sets the route preference value of OSPF in the router. Resets the default administrative mode of OSPF in the router (active). Configures the exit overflow interval for OSPF. Configures the external LSDB limit for OSPF. Disables OSPF maximum transmission unit (MTU) mismatch detection. Sets the number of paths that OSPF can report for a given destination. Enables the global passive mode by default for all interfaces. Sets a 4-digit dotted-decimal number uniquely identifying the router OSPF ID. Enters Router OSPF mode. Displays information relevant to the OSPF router. Displays the internal OSPF routing table entries to Area Border Routers (ABR). Displays the internal OSPF routing table entries to Autonomous System Boundary Routes (ASBR). Displays information about recent Shortest Path First (SPF) calculations. Configures the SPF delay and hold time. Enables OSPF traps. Enables OSPF 1583 compatibility. Configuring Routing 517