Dell PowerConnect 6248 User's Guide - Page 205

Figure 6-72. CP Local User Summary 3. To remove a configured user, select the Remove option in the appropriate row, and then click Apply Changes. Configuring Users in a Remote RADIUS Server You can use a remote RADIUS server client authorization. You must add all users to the RADIUS server. The local database does not share any information with the remote RADIUS database. The following table indicates the RADIUS attributes you use to configure authorized captive portal clients. The table indicates both RADIUS attributes and vendor-specific attributes (VSA). VSAs are denoted in the Attribute column and are comma delimited (vendor id, attribute id). Table 6-38. Captive Portal User RADIUS Attributes Attribute User-Name User-Password Session-Timeout Number 1 2 27 Idle-Timeout 28 Description Range User name to be authorized 1-32 characters User password 8-64 characters Logout once session timeout is Integer (seconds) reached (seconds). If the attribute is 0 or not present then use the value configured for the captive portal. Logout once idle timeout is Integer (seconds) reached (seconds). If the attribute is 0 or not present then use the value configured for the captive portal. Usage Required Required Optional Optional Default None None 0 0 User Group You can assign Local Users to User Groups that you create. If the Verification Mode is Local or RADIUS, you assign a User Group to a CP Configuration. All users who belong to the group are permitted to access the network through this portal. The User Group list is the same for all CP configurations on the switch. To view and configure User Groups, click System →Captive Portal →User Group. Configuring System Information 205