Dell PowerConnect 6248 User's Guide - Page 300

The following table summarizes the equivalent CLI commands you use to configure an IP-based ACL. Table 7-4. IP ACL Commands CLI Command access-list show ip access-lists Description Creates an Access Control List Displays access lists applied on interfaces and all rules that are defined for the access lists. IP ACL Rule Configuration Use the IP ACL Rule Configuration page to define rules for IP-based ACLs. The access list definition includes rules that specify whether traffic matching the criteria is forwarded normally or discarded. Additionally, you can specify to assign traffic to a particular queue, filter on some traffic, change VLAN tag, shut down a port, and/or redirect the traffic to a particular port. NOTE: There is an implicit "deny all" rule at the end of an ACL list. This means that if an ACL is applied to a packet and if none of the explicit rules match, then the final implicit "deny all" rule applies and the packet is dropped. To display the IP ACL Rule Configuration page, click Switching →Network Security →Access Control Lists →IP Access Control Lists →Rule Configuration in the tree view. 300 Configuring Switching Information