Dell PowerConnect 6248 User's Guide - Page 45

Check Boxes Table 2-4. Check Boxes Check Box Type Add Remove General selection Description Hyperlink that takes you to a configuration page. Removes the selected item. To enable a configuration item, i.e., adjust sensitivity of log files, select match criteria for diffserv, select ACL rule parameters. Defining Fields User-defined fields can contain 1-159 characters, unless otherwise noted on the Dell OpenManage Switch Administrator Web page. All characters may be used except for the following Accessing the Switch Through the CLI The switch can be managed over a direct connection to the console port or through a Telnet connection. NOTE: If you are managing a stack, ensure the serial interface cable is attached to the Master switch of the stack. Using the CLI is similar to entering commands on a Linux system. If access is through a Telnet connection, ensure the device has an IP address defined and that the workstation used to access the device is connected to the device prior to using CLI commands. For information about configuring an initial IP Address, see "Configuration Overview." Using Dell™ OpenManage™ Switch Administrator 45