Dell PowerConnect 6248 User's Guide - Page 256

Figure 6-114. Stack Port Summary The Stack Port Summary page contains the following fields: • Unit - ID number of the unit. • Interface - Identifies the stack interface assigned to the unit. • Configured Stack Mode - Indicates whether or not each unit is able to participate in the stack. • Running Stack Mode - Indicates whether or not each unit is actually participating in the stack. • Link Status - Indicates whether or not the stack interface for each unit is operating. • Link Speed (Gb/s) - Indicates the nominal speed of each unit's link. Viewing Stack Port Summary Using CLI Commands For information about the CLI commands that perform this function, see the System Management Commands chapter in the CLI Reference Guide. The following table summarizes the equivalent CLI commands you use to view Stack Port information. Table 6-55. Stack Port Commands CLI Command stack-port show stack-port Description Configures ports as either stack ports, or as Ethernet ports. Displays summary stack-port information for all interfaces. Stack Port Counters Use the Stack Port Counters page to view the transmitted and received statistics, including data rate and error rate. To display the Stack Port Counters page, click System →Stacking →Stack Point Counters in the tree view. 256 Configuring System Information