Dell PowerConnect 6248 User's Guide - Page 574

• Advertise Mode - The values are Enable or Disable. Enable denotes that Router Discovery is enabled on that interface. • Advertise Address - The IP Address used to advertise the router. • Maximum Advertise Interval (secs) - The maximum time (in seconds) allowed between router advertisements sent from the interface. • Minimum Advertise Interval (secs) - The minimum time (in seconds) allowed between router advertisements sent from the interface. • Advertise Lifetime (secs) - The value (in seconds) used as the lifetime field in router advertisements sent from the interface. This is the maximum length of time that the advertised addresses are to be considered as valid router addresses by hosts. • Preference Level - The preference level of the router as a default router relative to other routers on the same subnet. Higher numbered addresses are preferred. Displaying Router Discovery Status Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • Router Discovery Protocol Commands The following table summarizes the equivalent CLI commands for this feature. Table 9-31. Router Discovery Status Command CLI Command show ip irdp Description Displays the router discovery information for all interfaces, or for a specified interface. Router The Router menu page contains links to web pages that configure and display route tables. To display this page, click Routing →Router in the tree view. Following are the web pages accessible from this menu page: • Route Table • Best Routes Table • Route Entry Configuration • Configured Routes • Route Preferences Configuration Route Table Use the Router Route Table page to display the route table configuration. 574 Configuring Routing